If the IP address of your router is 192.168.254.254, you can log into it with the given steps in this post. Besides, MiniTool offers you some additional information about this IP address. You will have an overall understanding of 18.104.22.168 after reading the post.
192.168.254.254 is a private IP address used as the default gateway address by some router manufacturers to access the router management interface. The top 192.168.254.254 brands include Siemens, Actiontec, Sagemcom, and Vonets. This address can also be used by devices like modems and IoT devices (DVRs and webcams).
A private or local IP address is used to protect the connection between a router and other NAT devices. It’s worth noting that it can only be used within a business or home network.
There are three ranges of private IP addresses: 10.0.0.0 – 10.255.255.255, 172.16.0.0 – 172.31.255.255, and 192.168.0.0 – 192.168.255.255. It is obvious that 192.168.254.254 belongs to the third set. To be specific, 192.168.254.254 belongs to the 16-bit block of IPv4 address ranges for private networks.
The IP address of a device usually can be found on a sticker at the bottom or side of the router. It might be printed on its box. If you don’t find the IP address from these places, open Command Prompt > enter ipconfig and hit Enter. The number behind Default Gateway is the IP address of your device.
Most of the routers on the market use either 192.168.0.1 or 192.168.1.1 as the default IP address.
Default and Popular Logins for 192.168.254.254
If you are going to log in to 192.168.254.254, keep an eye on the following default logins.
There are two commonly used default logins for 192.168.254.254.
IP address: 192.168.254.254
IP address: 192.168.254.254
The following are the 3 most popular default logins for the IP address 192.168.254.254.
The table below shows you the corresponding username and password for different brands of routers.
|Globe At Home||
|Frontier||admin||The password usually is printed on the side or bottom of the router.|
Also read: 10.0.0.1: Steps to Log in to It and Tips for Fixing Login Failure
192.168.254.254 Login Steps
Before starting the 192.168.254.254 login process, you should ensure your operating system (Windows, macOS, Android, Linux, etc.) is on the same network as the router. Besides, the IP address of your router is 192.168.254.254. Otherwise, you can’t log in to it successfully.
Step 1: Open a web browser on your computer.
Step 2: Type 192.168.254.254 at the search bar of the browser and hit Enter. Alternatively, you can also directly click http://192.168.254.254 to move forward.
If you type http:192.168.254.254 or other wrong IP addresses, no login screen appears.
Step 3: Enter the username and password. If you have changed the username and password of the router but you forget them, reset your router.
Step 4: Press Enter or click on the Login button.
After entering the router management interface, you can change the Wi-Fi password, SSID, DNS, and make other router settings. For instance, you are able to change your Wi-Fi password and SSID with the steps below.
- Navigate to the Advanced/Setup tab > WiFi > WiFi Security Settings.
- Input the Wi-Fi name (SSID) and choose Security mode: WPA/WPA-PSK and Wi-Fi password.
- Tap Save to apply the changes.
As you see, this post is a full 192.168.254.254 login guide. With this tutorial, you can log in to the router management interface of this IP address and change the settings in the panel. If you encounter other issues related to partition or disk, use MiniTool Partition Wizard or other products of MiniTool Ltd.
User Comments :Post Comment