A lot of users complain about Xbox One power supply orange light. It is a common issue with the Xbox One power supply. Don’t worry. This post of MiniTool summarizes several simple ways to fix it. Let’s start trying.
What does Xbox One power supply orange light mean? The orange light means that your console is on standby and it’s not receiving sufficient power to turn on the console. Xbox One comes with built-in surge protection that protects the console from electricidal damage. Once a power surge is detected, your console will enter into a surge mode and cut the power supply. So, a power outage usually causes the Xbox One power brick orange light.
If the Xbox console was not powered off properly, it may trigger the Xbox One power brick orange issue. In addition, a damaged power cable, problematic outlet, and even a clogged power brick are also responsible for the problem. Here we provide corresponding solutions. Let’s get started.
Lots of users encounter the account.live.com issue when signing in to Xbox. Don’t worry. There are 4 effective ways for accountlive.com to fix the problem Xbox.
Fix 1. Check the Power Outlet
If the Xbox One power supply orange light is constant, it means there is an issue with the power outlet or cable. So, we recommend you check the outlet before trying other solutions.
Step 1. Make sure that you connect the power supply to the power outlet and Xbox One correctly.
Step 2. To check if there is electricity coming through the power outlet, you can plug the power supply into another outlet or connect another device to the same outlet.
If the Xbox One power brick orange light issue still occurs, you can move down to the following solutions.
Fix 2. Check the Power Brick/Cable
Sometimes your power supplies might go bad after a power outage. So, we recommend you check if the power cable or brick is intact. To do so, you can use a replacement power cable and brick of your Xbox console. If it boots up without Xbox One power brick orange light, it indicates that your previous power supply may get damaged. If it doesn’t work, you can try other solutions.
Fix 3. Reset Your Xbox One Power Supply
In addition, the “Xbox One won’t turn on power brick orange” issue can occur due to a temporary glitch. To fix it, you can try resetting your Xbox One power supply.
Step 1. Unplug the power supply from your Xbox and the power outlet.
--image from support.xbox.com
Step 2. Keep it unplugged for about 10 minutes to let the power supply reset.
Step 3. Plug the power supply back into your Xbox and the outlet properly. Then you can check if the Xbox One is turned on without orange light.
Fix 4. Clean the Xbox Power Brick
As mentioned above, a clogged power supply is also responsible for Xbox One won’t turn on power brick orange. This is because it can’t be able to receive enough power energy from your supply when the power supply is clogged with dust. To exclude this situation, you can use a hair dryer to blow out the dust carefully. Once cleaned, you can power up and see if the issue gets solved.
Fix 5. Hard Reset Your Xbox One
If the above methods fail to resolve the Xbox One power supply orange light issue, you can perform a hard reset of your console. By doing so, all cache files and improper Xbox settings can be cleaned. For that:
Step 1. Make sure there is no disc in your console.
Step 2. Hold down the Power button for about 10 seconds and release it as the screen turns off.
Step 3. Disconnect the power cable from your console and wait for about 10 seconds.
Step 4. Reconnect the power cable and press the Power button to turn the console on. Then check if the issue is fixed.