Two Programs Will Help You Replace Laptop Hard Drive with SSD
Is your laptop hard drive too small to store a large amount of data? Or is the hard disk too old so that Windows runs at a slow speed? Don't worry. MiniTool programs – MiniTool ShadowMaker and MiniTool Partition Wizard bring much convenience to you to replace laptop hard drive by disk cloning in Windows 10/8/7.
Simple Disk Upgrade Makes Your PC Run Like New
Do you have a laptop with insufficient disk space? Or the computer can't meet your requirement for PC performance? To put it simply, it is most likely that many kinds of files are saved on your hard drive, which can take up much disk space. Moreover, if the hard drive has been used for many years, your laptop can run slowly. Under these circumstances, to replace laptop hard drive will be the best solution.
Want to do the laptop hard drive recovery before replacing? MiniTool Power Data Recovery can help.
Which hard drive do you want to use to replace the old or small disk? For a better computer performance, SSD should be the first option due to its outstanding merits, for example, SSD has faster read-write speed than classic hard disks. If you take SSD as your system disk, booting into Windows will take you seconds. Besides, for programs, they will take no time to load. Moreover, laptop hard drive replacement cost is not too expensive. When you find your Windows doesn't run as it is normal, if you don't want to reinstall the operating system or pay for a brand-new laptop, it is well worth the investment. How do you replace a hard drive in Windows 10/8/7? In this article, we will walk you through the details.
How to Replace Laptop Hard Drive via Disk Cloning
As to this issue, actually, it is pretty simple. Basically, this replacement process refers to cloning the entire content on your existing laptop hard drive to an SSD, then taking out the original hard drive and putting the SSD in its place. Let's see some details.
1. Purchase an appropriate SSD
It should be compatible with your laptop since some old models may use a parallel ATA connector, not SATA. Besides, please keep in mind another important thing: confirm the actual size of the current hard disk and make sure the SSD you get has a higher capacity to hold all data.
2. Prepare cloning software
Many of them can work well. Here, MiniTool programs – MiniTool ShadowMaker and MiniTool Partition Wizard can bring you much convenience in the laptop hard drive replacement.
3. Need a USB-SATA adapter
How to connect SSD to laptop externally? Please connect your SSD via a USB-SATA adapter to your laptop for hard drive disk cloning. This can work better than connecting via USB cable.
4. Initialize SSD
If the SSD is brand-new, please initialize it to MBR or GPT in Windows Disk Management. Otherwise, it cannot be used.
Replace Laptop Hard Drive via MiniTool ShadowMaker
Have you heard of MiniTool ShadowMaker? Actually, it has won a great reputation from many computer users due to its powerful functions. At first glance, you know it is a piece of professional backup and restore software, which allows you to back up your system, partition or disk. Then, perhaps you will ask us: can this backup software make you do disk cloning? In fact, in addition to backup & restore functions, it also enables you to clone a disk for replacing hard drive in Windows 10/8/7. Want to know how can you clone your laptop hard drive for disk replacement? Just download this free disk cloning software for a try.
After getting MiniTool ShadowMaker Free Edition, please install it on your computer which can be Windows 10, Windows 8 or Windows 7. Then, begin the cloning.
Step 1: Click the icon of MiniTool ShadowMaker Free Edition on your laptop. Then, you will enter the following interface where you need to choose one computer to manage.
On the other hand, if you need to upgrade the hard disk on another laptop by remote control, choose Remote section. This is not included in the Free Edition of MiniTool ShadowMaker, but the Beta 3.0 supports this feature.
Step 2: Then, click Clone Disk which is located in Tools tab. By means of this feature, it is quite easy to finish disk cloning, including cloning the system disk and data disk.
Step 3: Then, a small window will pop out to show you the next operation: select a source disk or target disk. From the following screenshot, you can see two modules. Please choose the corresponding section to do this job.
1. As to source disk, as far as we are concerned, system disk is selected commonly. By disk cloning, you can upgrade laptop hard drive without reinstalling Windows when Windows runs slowly.
2. When entering the source section or destination section, in the combo box, if your SSD has been connected to your laptop and it is recognized by Windows, it will appear. Just choose the SSD for disk cloning.
Step 4: After completing selecting hard drives, click OK to perform the next step. Then, a warning will appear, informing you all data on the target disk will be destroyed.
- If you use a brand-new SSD as the destination disk, please click Yes to continue.
- If your SSD contains something important, you had better use MiniTool ShadowMaker to make a backup.
Step 5: Then, MiniTool ShadowMaker will automatically perform the copy progress. From the figure below, you see some information about the laptop hard drive cloning: source disk, destination disk, elapsed time and remaining time. Be patient for this process, please.
When the progress bar reaches 100%, you will get one message, reporting you that you should disconnect your original hard drive or the target hard drive; otherwise, one disk may be marked as offline by Windows operating system.
As to replacing a hard drive in Windows 10/8/7, this piece of information should be taken seriously. In other words, if you need to replace laptop hard drive with SSD, it is necessary to shut down your laptop, remove the original hard drive and put the SSD into the original place.
Until now, so much information about how to clone a laptop hard drive with MiniTool ShadowMaker has been informed to you. The steps are very simple as long as you follow the above instructions. After completing the disk cloning, just replace laptop HDD with SSD. Then, restart your laptop, then Windows will run very fast.
To sum up, MiniTool ShadowMaker is a good assistant to replace laptop hard drive with SSD without reinstalling operating system. Hope you can also own such a piece of hard drive cloning software in your Windows 10/8/7. Get this tool right now or share it with your friends.
Clone Laptop Hard Drive with MiniTool Partition Wizard
MiniTool Partition Wizard, another piece of dedicated PC cloning software, is also released by MiniTool Solution Ltd. Due to its powerful features, it is gaining popularity and now over 20,000,000 users download this partition magic from CNET. In order to complete disk cloning or OS migration to replace laptop hard drive, MiniTool Partition Wizard provides you with two features which are both useful for disk cloning:
- Migrate OS to SSD/HD
This feature can only work on the system disk. By means of it, you can copy all partitions on the system disk to another disk or only clone the system required partitions.
- Copy Disk
It enables you to clone all the content of the entire hard disk including system disk or data disk to another hard drive.
Want to use this hard drive cloning software to upgrade laptop hard drive without reinstalling Windows? Get MiniTool Partition Wizard Free Edition on your laptop with Windows 10, Windows 8 or Windows 7 in an instant.
How do you clone your hard drive to an SSD? Take Migrate OS to SSD/HD as an example. The details are here.
Step 1: Launch MiniTool Partition Wizard Free Edition in Windows 10/8/7. Then, you can see Migrate OS to SSD/HD feature in the toolbar. Click it to the next step.
Step 2: Then, you will enter a page to choose a method to migrate your system disk. Here if you want to replace your system disk with another hard disk, A is available. On the other hand, if you want to only move operating system to another disk, B is proper.
Step 3: Decide the destination disk you want to use to replace your system disk. Here please choose the SSD you have connected to your laptop.
Step 4: Check one copy option from the following figure.
1. For an SSD or advanced format disk, please align all partitions to 1MB, which can improve the computer performance.
2. If you want to clone OS disk with MBR to GPT disk, the Free Edition of MiniTool Partition Wizard is not supported. Get the Professional Edition or an advanced edition when there is a need.
Step 5: Then a window pops up to tell you what you need to do to ensure your laptop can be booted from this destination disk.
Step 6: Execute all the operations you have made by hitting Apply button at last.
After finishing the disk cloning, you can replace laptop hard drive with SSD. By this way, your operating system can run from the SSD at a fast speed. Enjoy this change now.
Tips: Physically Replace Your Current Disk with the SSD
How do you remove the hard drive from a laptop? How to replace the hard drive with SSD? Let's see the details.
1. Turn off your laptop, disconnect both the power cable and any other connected cables, and remove the back panel of your laptop to get access to your hard drive.
2. Look for the screws which are used to secure your hard drive to the laptop and then unscrew those screws. Note that the hard drive may be on the edge of the laptop or it is placed under the battery.
3. Pull this hard disk out by lifting the old disk up about 45 or 30 degrees.
4. Reverse the process about how you remove the HDD: put the SSD in the original place at an angle, ensure it is fully connected to the interface, secure it with screws and screw the back panel. Be sure that all the screws are being used. In our experience, you have done something wrong if a screw or two left over.
Like that, all things you need to do for laptop hard drive replacement are shown here. Just do as the above steps say to replace laptop HDD with SSD well.
After reading this post, you know much information about why need to replace laptop hard drive with SSD, how to clone a laptop hard drive for disk replacement or disk upgrade and how to install SSD in a laptop in Windows 10/8/7. With the help of MiniTool ShadowMaker and MiniTool Partition Wizard, replacing a hard drive without reinstalling Windows can be done well. Get one of these two cloning tools for a try.
When using our programs, please tell us your questions if you have. Besides, as for the suggestions, please also share with us. You can leave a comment in the following area or send your opinions to firstname.lastname@example.org. Thanks.