How to convert FAT32 to NTFS

• Since NTFS was released, the way to convert FAT32 to NTFS becomes the hot topic. As everybody knows, compared with FAT32, NTFS is a file system with more superior performance and enhanced security. The self-repairing function provided by it can efficiently avoid losing data. As for the user of FAT32, you always have to spend much time to detect the bad sectors, while the NTFS file system is born with self-recovery function so that you can avoid using the bad sector. If you are annoyed with the problem, such as: data loss caused by bad sectors; operating system and application program can not be operated normally. Why don't you convert FAT32 to NTFS with MiniTool Partition Wizard?
  
  Sector detection annoy FAT32 users
  Disk is precise data storage equipment. Appearance of bad sectors not only affects the normal operation of operating system such as: read and write operation to data, but also threatens the data security in the disk. In order to avoid using bad sectors, the users of FAT32 need to regularly detect the sectors, and timely mark bad sector, making the operating system avoid these damaged sectors when it executes writing operation. If your hard drive capacity is very huge, the sector detection work will cost plenty of your time. As service life of the hard disk increases, there will be frequent sector detection and repair work. If you are annoyed with frequent sector repair work take you a lot of time, why not convert the FAT32 file system to NTFS? In this way, you can avoid wasting so much energy for the sectors reparation.
  
  The self-recovery function of NTFS helps you solve the problem of damaged sector
  The emergence of the bad sectors has been a headache for many computer users. If you are using FAT32 file system, you must turn to Scandisk to mark bad sectors on the disk. But when you found the errors, data has been always written in bad sectors, causing loss. But NTFS file system can help you avoid this problem, NTFS will check whether the sector is correct or not in every reading and writing operation. When bad sectors were found in operation of reading the disk data, NTFS will report this error. And a intact location was provided by intelligent NTFS to store data when mistakes were found during the data write process, which doesn't affect the operation. In both cases, NTFS will mark bad sectors in case it is used in the future. This is self-recovery function provided by NTFS for the users, which makes the bad sector be detected early, avoiding catastrophic accidents.
  
  A perfect assistant to convert FAT32 to NTFS
  Through the above explanation, maybe you have agreed that the NTFS performs more superior in solving the bad sectors. So how to convert FAT32 to NTFS file system? Actually, as long as you use MiniTool Partition Wizard partition software, it becomes very simple. With this kind of partition software, you can easily convert FAT32 to NTFS without causing any damage to the data in the partition. Here is the detailed operation demo:
  Before use this software, you can free download it by visiting the official website of MiniTool Partition Wizard http://www.partitionwizard.com.
  During the installation, please note: installing software on operating partition which is not to be converted. After the installation, run the software to enter the main interface:
  
  
  Select the partition which should be converted on the main interface, then right click and select "Convert FAT to NTFS" options in the right shortcut menu, you will enter the Convert File System interface:
  
  
  
  Click "Start" button on the Convert File System interface, the software will immediately begin to convert the file system. After that, the notice that the convert of file system is complete will appear on the interface. And then click "Close" to return to the main interface:
  
  
  
  At last, you will find that the FAT32 partition had been successful converted into NTFS.
  
  Through the above detailed demo, you will find it is very simple to convert FAT32 to NTFS with MiniTool Partition Wizard. Just a few steps of operation can help you achieve the purpose. MiniTool Partition Wizard not only provides the perfect function and effective security measures, but also simplifies the complex degree of the operation, which help you easily complete the operation. Good solution is provided for both the convert of the file system, and most daily need disk management work by MiniTool Partition Wizard.